Absoflockinlutely

So, What Is Flock you ask?

In short, the flocking process involves applying short monofilament fibres, usually nylon or rayon, directly on to a substrate that has been previously coated with an adhesive. The diameter of the individual flock strand is only a few thousandths of a centimetre, and ranges in length from 0.25 - 5 mm. Adhesives that capture the fibres must have the same flexibility and resistance to wear as the substrate. The process uses special equipment that electrically charges the flock particles causing them to stand-up. The fibres are then propelled and anchored into the adhesive at right angles to the substrate. The application is both durable and permanent. Flock can be applied to glass, metal, plastic, paper or textiles. Flock design applications are also found on many items such as garments, greeting cards, trophies, promotional items, toys and book covers.

Why use flock?

There are many reasons to use flock, more than its velvet appearance it provides an anti-glare surface - Ideal for dashboards
Reduces condensation build up,
Can help towards hiding marks and scratches,
Creates sound insulation,
Reduces resonance and noises such as rattles,
It doesn't absorb water as it is waterproof,
Creates heat insulation,
It is a lightweight option,
It is extremely durable

How is the flock applied by us?

First a suitable adhesive is applied to the surface to be flocked. The flock is then applied, penetrating the surface of the adhesive to create the desired velvet finish.

Electrostatic flock applicators charge the flock particles which are then attracted to the grounded surface that is to be flocked. Unlike puffer or blown application methods which merely sprinkle a flock layer onto the surface, electrostatic application ensures that the fibres all end up standing at right angles to the surface resulting in a velvet finish.

Electrostatic flocking is used extensivley in the automotive industry for coating window rubbers, glove boxes, coin boxes, door cards, consoles, and dashboards. Rally cars usually have their dashes flocked to reduce reflections and to provide an as new finished to a modified dash.

Flocking is proving successful in a number of artistic ventures including the decoration of jewellery, ceramics and pottery.

Using suitable adhesives flock can be applied to an endless range of materials including plastic, metal, wood, rubber and fibreglass.

A wide variety of flock adhesives are available, both single part and two-part catalysed systems. Adhesives are generally water or solvent based. Some are air drying, others temperature or catalyst curing. Adhesives are usually applied by brush, roller, spray or screen printing.

How Durable Is Flock?

The nylon flock itself can withstand temperatures up to 220°C & most adhesives 120°C, giving a wide range of areas to be used in, It is waterproof or water repellant depending on application requirements, flocked items can be jet washed & withstand many detergents, the best way to clean a flocked interior is by either blowing off with an air line or vacuumed with a brush attachment.
Flock MUST NOT be cleaned or painted with solvents as this will damage the adhesive and give an unsightly appearance.
Flock is permanent, there is no easy way to remove it so it will provide a satisfying finish for many years.

IMPORTANT INFORMATION
WE CANNOT TAKE RESPONSIBILITY FOR ITEMS WHICH HAVE BEEN TREATED WITH ANY KIND OF SILICONE BASED PRODUCTS, EVERY EFFORT TO REMOVE ALL SILICON TRACES WILL BE MADE BUT DUE TO ITS NATURE IT IS NOT ALWAYS SUCCESSFULLY REMOVED.