Hammersmith Bridge

Hammersmith Bridge is a suspension bridge that crosses the River Thames in west London. It allows road traffic and pedestrians to cross from the southern part of Hammersmith in the London Borough of Hammersmith and Fulham, on the north side of the river, to Barnes in the London Borough of Richmond upon Thames, on the south side of the river. The current bridge, which is Grade II* listed and was designed by the noted civil engineer Sir Joseph Bazalgette, is the second permanent bridge on the site.HistoryThe construction of a bridge was first sanctioned by an Act of Parliament in 1824 and work on site began the following year. It was the first suspension bridge over the River Thames and was designed by William Tierney Clark.The bridge had a clear water-way of 688ft. Its suspension towers were above the level of the roadway, where they were thick. The roadway was slightly curved upwards, above high water, and the extreme length from the back of the piers on shore was 822ft, supporting of roadway. There were eight chains, composed of wrought-iron bars, each five inches deep and one thick. Four of these had six bars in each chain; and four had only three, making thirty-six bars, which form a dip in the centre of about. From these, vertical rods were suspended, which supported the roadway, formed of strong timbers covered with granite. The width of the carriageway was, with two footways of. The chains passed over the suspension towers, and were secured to the piers on each shore. The suspension towers were of stone, and designed as archways of the Tuscan order. The approaches were provided with octagonal lodges, or toll-houses, with appropriate lamps and parapet walls, terminating with stone pillars, surmounted with ornamental caps. Construction of the bridge cost some £80,000. The bridge was opened on 6 October 1827; it was operated as a toll bridge.